# IoT Edge Gateways

**URL:** https://community.inhand.com/c/iot-edge-gateways/48.md

[Latest](https://community.inhand.com/latest.md) · [Categories](https://community.inhand.com/categories.md) · [Tags](https://community.inhand.com/tags.md)

---

## [About the IoT Edge Gateways category](https://community.inhand.com/t/about-the-iot-edge-gateways-category/1697)

<div class="topic-metadata">

**Author:** [@inhand](https://community.inhand.com/u/inhand)\
**Replies:** 0

</div>

---

## [IG502 - enabling Trigger mode instead of Polling on Digital Inputs](https://community.inhand.com/t/ig502-enabling-trigger-mode-instead-of-polling-on-digital-inputs/1743)

<div class="topic-metadata">

**Author:** [@kyleb](https://community.inhand.com/u/kyleb)\
**Replies:** 0\
**Last updated:** [September 30, 2026, 6:16pm UTC](https://community.inhand.com/t/ig502-enabling-trigger-mode-instead-of-polling-on-digital-inputs/1743 "2026-09-30T18:16:18Z")

</div>

I have a question about the IG502, is there a way to switch the Digital Input collection method from Polling to Trigger? I have a MQTT Cloud Quick Function that fires off when the Digital Inputs are switched to HIGH or 1…

---

## [EC312 Communication with Mitsubishi Q-Series CPU via InHand Device Supervisor](https://community.inhand.com/t/ec312-communication-with-mitsubishi-q-series-cpu-via-inhand-device-supervisor/1742)

<div class="topic-metadata">

**Author:** [@Amit](https://community.inhand.com/u/Amit)\
**Replies:** 0\
**Last updated:** [September 30, 2026, 6:16pm UTC](https://community.inhand.com/t/ec312-communication-with-mitsubishi-q-series-cpu-via-inhand-device-supervisor/1742 "2026-09-30T18:16:05Z")

</div>

Identify the communication protocol supported by the Mitsubishi Q CPU. Configure the required serial/Ethernet communication parameters. Establish reliable communication between the EC312 and Q CPU. Verify successful PLC…

---

## [Does IG902 have Modbus \<-\> 104 conversion functionality?](https://community.inhand.com/t/does-ig902-have-modbus-104-conversion-functionality/1588)

<div class="topic-metadata">

**Author:** [@JayFreemanJin](https://community.inhand.com/u/JayFreemanJin)\
**Replies:** 1\
**Last updated:** [March 5, 2026, 9:45am UTC](https://community.inhand.com/t/does-ig902-have-modbus-104-conversion-functionality/1588 "2026-03-05T09:45:55Z")

</div>

If inscribe.

---

## [IG502](https://community.inhand.com/t/ig502/1553)

<div class="topic-metadata">

**Author:** [@JayFreemanJin](https://community.inhand.com/u/JayFreemanJin)\
**Replies:** 1\
**Last updated:** [March 5, 2026, 9:38am UTC](https://community.inhand.com/t/ig502/1553 "2026-03-05T09:38:36Z")

</div>

Anyone using the IG502 with Losant.com ? I've tried three different devices from Inhand and none of them will authenticate using MQTT on Losant.

---

## [How to solve the problem that the browser cannot access the IG configuration page](https://community.inhand.com/t/how-to-solve-the-problem-that-the-browser-cannot-access-the-ig-configuration-page/1549)

<div class="topic-metadata">

**Author:** [@JayFreemanJin](https://community.inhand.com/u/JayFreemanJin)\
**Replies:** 1\
**Last updated:** [March 5, 2026, 9:25am UTC](https://community.inhand.com/t/how-to-solve-the-problem-that-the-browser-cannot-access-the-ig-configuration-page/1549 "2026-03-05T09:25:00Z")

</div>

If Inscribe.

---

## [IG902 updated firmware download](https://community.inhand.com/t/ig902-updated-firmware-download/1548)

<div class="topic-metadata">

**Author:** [@JayFreemanJin](https://community.inhand.com/u/JayFreemanJin)\
**Replies:** 2\
**Last updated:** [March 5, 2026, 9:24am UTC](https://community.inhand.com/t/ig902-updated-firmware-download/1548 "2026-03-05T09:24:57Z")

</div>

Hello,we can't find the download link for the latest firmware version for the InHand IG902 Gateway. In the support section there is only the 2.0.0 version from 2021. Where can we find an updated version? The oldest one…

---

## [IG902 reboot](https://community.inhand.com/t/ig902-reboot/1512)

<div class="topic-metadata">

**Author:** [@JayFreemanJin](https://community.inhand.com/u/JayFreemanJin)\
**Replies:** 1\
**Last updated:** [March 5, 2026, 9:12am UTC](https://community.inhand.com/t/ig902-reboot/1512 "2026-03-05T09:12:28Z")

</div>

I have IG902 with 4G module... Inhand routers all have SMS reset/reboot option, but IG not... How to restart device on remote site ? Is there any option to do that ? or just scheduled restart eg.. every…

---

## [How to setup Wi-Fi on IG502](https://community.inhand.com/t/how-to-setup-wi-fi-on-ig502/1503)

<div class="topic-metadata">

**Author:** [@JayFreemanJin](https://community.inhand.com/u/JayFreemanJin)\
**Replies:** 1\
**Last updated:** [March 5, 2026, 8:30am UTC](https://community.inhand.com/t/how-to-setup-wi-fi-on-ig502/1503 "2026-03-05T08:30:25Z")

</div>

Background: InHand InGateway with the -WLAN tag on the part number have a Wi-Fi module to allow the router to broadcast internet like an Access Point. Here is how to set it up. 1. Connect PC directly to router via Eth…

---

## [NAT 1:1 IG502](https://community.inhand.com/t/nat-1-1-ig502/1520)

<div class="topic-metadata">

**Author:** [@Jarsantos](https://community.inhand.com/u/Jarsantos)\
**Replies:** 2\
**Last updated:** [March 5, 2026, 5:37am UTC](https://community.inhand.com/t/nat-1-1-ig502/1520 "2026-03-05T05:37:27Z")

</div>

How to do NAT 1:1 LAN/WAN on IG502? Could anyone help please?

---

## [Web management interface for IG902H not accessible](https://community.inhand.com/t/web-management-interface-for-ig902h-not-accessible/1513)

<div class="topic-metadata">

**Author:** [@JayFreemanJin](https://community.inhand.com/u/JayFreemanJin)\
**Replies:** 2\
**Last updated:** [March 5, 2026, 5:36am UTC](https://community.inhand.com/t/web-management-interface-for-ig902h-not-accessible/1513 "2026-03-05T05:36:39Z")

</div>

We have an edge gateway IG902H which was already configured. A few days back it was powered off due to some network and infrastructure related changes at the site. Now, after connecting back to the power, it is not s…

---

## [IG502 DOUT - how to ensure DOn is not driven low after boot](https://community.inhand.com/t/ig502-dout-how-to-ensure-don-is-not-driven-low-after-boot/1511)

<div class="topic-metadata">

**Author:** [@JayFreemanJin](https://community.inhand.com/u/JayFreemanJin)\
**Replies:** 2\
**Last updated:** [March 5, 2026, 5:36am UTC](https://community.inhand.com/t/ig502-dout-how-to-ensure-don-is-not-driven-low-after-boot/1511 "2026-03-05T05:36:29Z")

</div>

Does any one know of a way to configuring the device so it starts up and doesn't drive the digital outputs low by default? The IG502 has low side drivers for DO0-3 with weak pull ups to 5~6V, This makes it very easy…

---

## [What industrial protocols can be supported by IG902?](https://community.inhand.com/t/what-industrial-protocols-can-be-supported-by-ig902/1644)

<div class="topic-metadata">

**Author:** [@JayFreemanJin](https://community.inhand.com/u/JayFreemanJin)\
**Replies:** 0\
**Last updated:** [February 27, 2026, 9:10am UTC](https://community.inhand.com/t/what-industrial-protocols-can-be-supported-by-ig902/1644 "2026-02-27T09:10:23Z")

</div>

Now, Modbus EtherNET/IP ISO on TCP and OPCUA can be supported in our Device Supervisor APP. We’re not planned to provide with API of industrial protocols, but we can provide with Demos of OPUCA Modbus …

---

## [IG902-Device\_supervisor](https://community.inhand.com/t/ig902-device-supervisor/1638)

<div class="topic-metadata">

**Author:** [@JayFreemanJin](https://community.inhand.com/u/JayFreemanJin)\
**Replies:** 0\
**Last updated:** [February 27, 2026, 9:10am UTC](https://community.inhand.com/t/ig902-device-supervisor/1638 "2026-02-27T09:10:17Z")

</div>

Refer to the attachment.

---

## [IG902B as Azure IoT Gateway for Modbus TCP Devices](https://community.inhand.com/t/ig902b-as-azure-iot-gateway-for-modbus-tcp-devices/1636)

<div class="topic-metadata">

**Author:** [@JayFreemanJin](https://community.inhand.com/u/JayFreemanJin)\
**Replies:** 0\
**Last updated:** [February 27, 2026, 9:10am UTC](https://community.inhand.com/t/ig902b-as-azure-iot-gateway-for-modbus-tcp-devices/1636 "2026-02-27T09:10:15Z")

</div>

Hey guys, I'm trying to hook up an IG902B with some Schneider PLCs and get the data on Azure IoT Hub. I'm been successful on configuring the PLC devices, but I'm stuck at configuring the Device Supervi…

---

## [Publish to IG502 using MQTT Has anyone tried this?](https://community.inhand.com/t/publish-to-ig502-using-mqtt-has-anyone-tried-this/1632)

<div class="topic-metadata">

**Author:** [@JayFreemanJin](https://community.inhand.com/u/JayFreemanJin)\
**Replies:** 0\
**Last updated:** [February 27, 2026, 9:10am UTC](https://community.inhand.com/t/publish-to-ig502-using-mqtt-has-anyone-tried-this/1632 "2026-02-27T09:10:10Z")

</div>

Has anyone had any success publishing anything using MQTT to the IG502? I can read do0 for example but can't publish to it. The status never changes. Can you see any log on this device from remote?

---

## [How to setup APN on IG502](https://community.inhand.com/t/how-to-setup-apn-on-ig502/1618)

<div class="topic-metadata">

**Author:** [@JayFreemanJin](https://community.inhand.com/u/JayFreemanJin)\
**Replies:** 0\
**Last updated:** [February 27, 2026, 9:09am UTC](https://community.inhand.com/t/how-to-setup-apn-on-ig502/1618 "2026-02-27T09:09:54Z")

</div>

1. Connect PC directly to router and log into router at 192.168.2.1 using default credentials (adm/123456) 2. Go to NetworkàNetwork InterfaceàCellular, and check the Enable Cellular. 3. Confirm SIM1 Netwo…

---

## [IG902H AWS IoT Greengrass import and installation failure](https://community.inhand.com/t/ig902h-aws-iot-greengrass-import-and-installation-failure/1611)

<div class="topic-metadata">

**Author:** [@JayFreemanJin](https://community.inhand.com/u/JayFreemanJin)\
**Replies:** 0\
**Last updated:** [February 27, 2026, 9:09am UTC](https://community.inhand.com/t/ig902h-aws-iot-greengrass-import-and-installation-failure/1611 "2026-02-27T09:09:43Z")

</div>

Hi, I’m Eng. Giuseppe Ferro from M2D company. We are from Italy. Could you help me with AWS IoT Greengrass installation and configuration? There is nothing on internet or documentation about it. I’m not …

---

## [InGateway 502 firmware download](https://community.inhand.com/t/ingateway-502-firmware-download/1608)

<div class="topic-metadata">

**Author:** [@JayFreemanJin](https://community.inhand.com/u/JayFreemanJin)\
**Replies:** 0\
**Last updated:** [February 27, 2026, 9:09am UTC](https://community.inhand.com/t/ingateway-502-firmware-download/1608 "2026-02-27T09:09:40Z")

</div>

The link for download of firmware 502 is not valid

---

## [InGateway USB port](https://community.inhand.com/t/ingateway-usb-port/1603)

<div class="topic-metadata">

**Author:** [@JayFreemanJin](https://community.inhand.com/u/JayFreemanJin)\
**Replies:** 0\
**Last updated:** [February 27, 2026, 9:09am UTC](https://community.inhand.com/t/ingateway-usb-port/1603 "2026-02-27T09:09:35Z")

</div>

Hi, these devices are special but, why not include the libusb library to be able to use the usb port as serial? It would give many opportunities for use Thanks

---

## [Problem with Device Supervisor on IG902 Gateway](https://community.inhand.com/t/problem-with-device-supervisor-on-ig902-gateway/1600)

<div class="topic-metadata">

**Author:** [@JayFreemanJin](https://community.inhand.com/u/JayFreemanJin)\
**Replies:** 0\
**Last updated:** [February 27, 2026, 9:09am UTC](https://community.inhand.com/t/problem-with-device-supervisor-on-ig902-gateway/1600 "2026-02-27T09:09:32Z")

</div>

Hello, we are using the Device Supervisor on an InHand InGateway IG902 to retrieve data from industrial PLCs to our Thingsboard server. We are having a problem configuring one of the machines we …

---

## [IG902 no external network](https://community.inhand.com/t/ig902-no-external-network/1597)

<div class="topic-metadata">

**Author:** [@JayFreemanJin](https://community.inhand.com/u/JayFreemanJin)\
**Replies:** 0\
**Last updated:** [February 27, 2026, 9:09am UTC](https://community.inhand.com/t/ig902-no-external-network/1597 "2026-02-27T09:09:29Z")

</div>

I'm having a difficult time getting the IG902 network configured correctly. I can only connect to it on GE 0/2 bridge mode. Everything else is a fail. GE 0/1 (set to dynamic) is connected to the router. It has an IP a…

---

## [How can I add multiple modbus tag values together into another tag](https://community.inhand.com/t/how-can-i-add-multiple-modbus-tag-values-together-into-another-tag/1595)

<div class="topic-metadata">

**Author:** [@JayFreemanJin](https://community.inhand.com/u/JayFreemanJin)\
**Replies:** 0\
**Last updated:** [February 27, 2026, 9:09am UTC](https://community.inhand.com/t/how-can-i-add-multiple-modbus-tag-values-together-into-another-tag/1595 "2026-02-27T09:09:24Z")

</div>

The idea is to be able to add the values of multiple data points or tags coming from a plc into one virtual tag that I can send via MQTT. I have multiple flows coming from a controller, I want to a…

---

## [Dial Switch on IG502](https://community.inhand.com/t/dial-switch-on-ig502/1593)

<div class="topic-metadata">

**Author:** [@JayFreemanJin](https://community.inhand.com/u/JayFreemanJin)\
**Replies:** 0\
**Last updated:** [February 27, 2026, 9:09am UTC](https://community.inhand.com/t/dial-switch-on-ig502/1593 "2026-02-27T09:09:22Z")

</div>

The pull-down resistance is OFF by default, and the dial switch is close to the non-antenna side.The corresponding relationship of dial switch is as follows:Interface 1A pull-up resist…

---

## [Telegraf](https://community.inhand.com/t/telegraf/1485)

<div class="topic-metadata">

**Author:** [@Fernando](https://community.inhand.com/u/Fernando)\
**Replies:** 0\
**Last updated:** [February 27, 2026, 9:07am UTC](https://community.inhand.com/t/telegraf/1485 "2026-02-27T09:07:17Z")

</div>

Gostaria de saber como instalar e usar o Telegraf no IG502?

---

## [Telegraf](https://community.inhand.com/t/telegraf/1484)

<div class="topic-metadata">

**Author:** [@Fernando](https://community.inhand.com/u/Fernando)\
**Replies:** 0\
**Last updated:** [February 27, 2026, 9:07am UTC](https://community.inhand.com/t/telegraf/1484 "2026-02-27T09:07:16Z")

</div>

Would you like to know how to install and use Telegraf on the IG502?

---

## [IG502 API Integration Support Request](https://community.inhand.com/t/ig502-api-integration-support-request/1479)

<div class="topic-metadata">

**Author:** [@Mahmoud](https://community.inhand.com/u/Mahmoud)\
**Replies:** 0\
**Last updated:** [February 27, 2026, 9:07am UTC](https://community.inhand.com/t/ig502-api-integration-support-request/1479 "2026-02-27T09:07:11Z")

</div>

Dear InHand Support Team, I need to integrate our IG502L (Firmware V2.2.0) with our platform via API.

---

## [InHand IG502 Enables Air Compressor Remote Monitoring & Predictive Maintenance for Auto Parts Plant](https://community.inhand.com/t/inhand-ig502-enables-air-compressor-remote-monitoring-predictive-maintenance-for-auto-parts-plant/1342)

<div class="topic-metadata">

**Author:** [@Sam](https://community.inhand.com/u/Sam)\
**Replies:** 0\
**Last updated:** [February 27, 2026, 9:04am UTC](https://community.inhand.com/t/inhand-ig502-enables-air-compressor-remote-monitoring-predictive-maintenance-for-auto-parts-plant/1342 "2026-02-27T09:04:29Z")

</div>

1. Scenario BackgroundA auto parts factory runs 12 air compressors (critical for production). Previously:Weekly manual inspections missed early faults (e.g., abnormal pressure), causing 2–3 hours of unplanned downtime p…

---

## [Smart Factory Machine Monitoring and Data Intelligence with IG502](https://community.inhand.com/t/smart-factory-machine-monitoring-and-data-intelligence-with-ig502/1299)

<div class="topic-metadata">

**Author:** [@David595](https://community.inhand.com/u/David595)\
**Replies:** 0\
**Last updated:** [February 27, 2026, 9:03am UTC](https://community.inhand.com/t/smart-factory-machine-monitoring-and-data-intelligence-with-ig502/1299 "2026-02-27T09:03:40Z")

</div>

1. Background and Challenges Modern manufacturing facilities often struggle to integrate data from diverse legacy equipment and modern sensors. Key challenges include: Protocol Fragmentation: Machines use various inco…

---

## [Remote Pump Station Monitoring in Smart Water Systems](https://community.inhand.com/t/remote-pump-station-monitoring-in-smart-water-systems/1298)

<div class="topic-metadata">

**Author:** [@David595](https://community.inhand.com/u/David595)\
**Replies:** 0\
**Last updated:** [February 27, 2026, 9:03am UTC](https://community.inhand.com/t/remote-pump-station-monitoring-in-smart-water-systems/1298 "2026-02-27T09:03:39Z")

</div>

1. Problem Description Municipal water departments often manage numerous pump stations distributed across wide geographic areas to ensure stable water pressure and effective wastewater drainage. Manual inspections of the…

[Next page](https://community.inhand.com/c/iot-edge-gateways/48.md?page=1)
